Grass Valley T2 Classic iDDR - Manual (Page 16)

16 T2 Users Manual –SP3/SP4– October 17, 2011
Chapter 2 T2 XDCAM Option
2. Install the XDCAM FAM Driver.
• For more information about the installation procedure of the XDCAM FAM
Driver, please refer to the instruction manual of your PDW-U1 or the Sony
Corporation Web site.
3. Exit the maintenance mode and restart your system in the normal mode.
CAUTION: Depending on your environment, you may be asked to restart your T2
after completing the XDCAM FAM Driver installation. In this case, you must
restart your system leaving it in the maintenance mode and then switch to the
normal mode (CommandCenter) after your T2 is started.
4. Connect your T2 and PDW-U1 with a USB cable.
• For more information about the connection between PDW-U1 and a power cord,
please refer to the instruction manual of your PDW-U1.
5. Turn on your PDW-U1 and insert a professional disc.
• A message appears indicating that a new removable device has been connected.
Removing a professional disc
1. Right-click XDCAM in the Browse tab, and then click Disconnect all .
T2
PDW-U1
USB cable