Grass Valley T2 Classic iDDR - Manual (Page 105)

October 17, 2011 T2 Users Manual –SP3/SP4– 105
Other additional/updated functions
Automatically adding a sub clip created in R1 to a playlist
You can set T2 to automatically add a sub clip created in the R1 channel to a playlist
loaded to the P1 channel or the P2 channel.
1. Click Config. , and then click Video in the "P1" tree or the "P2" tree.
2. Check When a subclip is created in R1, automatically mount it in the playlist
of the player.
3. Click OK .
CAUTION: This function is disabled in the following conditions:
- The specified channel is locked or the 3D sync mode is set to on
- The specified channel is in the Fill/Key output mode
- The specified channel is in the remote mode (except when the local operations are
enabled in the remote mode)
- 1Out restricted clip is loaded to the other channel
Setting the preview update interval
The setting operation for the preview update interval in the R1/P1/P2 channel will be
changed.
The internal decode process in Grass Valley HQ Codec is stopped if you set T2 not to
update the preview of the R1 channel.
The following is the procedure for setting the preview update interval.
* Cannot set this option in the front panel mode.
1. Click Config. , and then click Miscellaneous in the "General" tree.