Grass Valley SSP-3801 Installation v.1.3 - Manual (Page 9)

5
SSP-3801
Installation and Configuration Guide
Clip formats
XDCAM HD and Sony IMX are the only officially supported clip formats. Formats outside of
these profiles may function correctly; however, it is recommended that you validate the
media you wish to use. The following are the encoding parameters supported by the SSP-
3801 card.
Clip wrapper format
• OP1a MXF wrapper
Essence types
• Video - MPEG2
• Any bit rate up to 100Mbits/sec
• Long GOP or I-Frame only
• Full frame (SD or HD)
• Full frame plus 16 lines VBI (as per Sony IMX), SD only
• Frame coded only (field coded essence is not supported)
• A/53 MPEG closed captions
• Audio - PCM
• Up to 16 channels of audio
• Audio can be presented as any number of multi-channel tracks (1 track of 16
channels, 16 tracks of 1 channel, 8 tracks of 2 channels, and so on)
• 8-, 16-, 24-, or 32-bit PCM (big endian and little endian supported)
• Floating point PCM data is not supported
• Ancillary - SMPTE-436M
• 8-bit VBI lines
• In luma plane (HD)
• In chroma plane (HD)
• Across both luma and chroma (SD)
• 1-bit and 10-bit VBI lines are not supported
• 8-bit ancillary packets
• In luma plane (HD)
• In chroma plane (HD)
• Across both luma and chroma (SD)
• 10-bit ancillary packets are not supported
Clip MXF Op1A XDCAM HD or Sony IMX
VANC VANC Created by csvanccreate.exe tool. For more
information, see
VANC Packet Creation Tool in the SSP-
3801 User Guide.
Type Extension Description