Running the setup wizard – Grass Valley SSP-3801 Installation v.1.3 User Manual
Page 31
27
SSP-3801
Installation and Configuration Guide
To log into an SSP-3801 card’s web interface:
1 Type the IP address of the SSP-3801 card into the address bar of a web browser. By
default cards are factory-configured and shipped with DHCP enabled. You can obtain
the card’s initial IP address using the Densité local control panel (see
Figure 4-1. SSP-3801 Login page
2 Specify a valid username and password and click OK.
If this is the first time you are logging into the SSP-3801, you should log in as follows:
• Username:
admin
• Password:
P1ayout
(the second character is the number 1)
The SSP-3801 web interface opens. All of the card’s parameters and settings are
available within the thematic menus on the left of the page.
Running the Setup wizard
The Setup Wizard makes configuring the SSP-3801 card easy and efficient. When you
launch the Setup Wizard, it will prompt you with a series of dialog boxes to provide the
information required.
IMPORTANT
To access the Solid State Playout-3801 web interface, we recommend
that you use a display with a minimum screen resolution of 1920 x 1080
pixels and the latest version of Google Chrome at 100% zoom in full-
screen (F11) mode.
IMPORTANT
Later in the initial configuration procedure we recommend that you
disable the card’s DHCP setting and that you assign the card an
appropriate static IP address on your local network (see
IMPORTANT
If you are configuring the SSP-3801 card for the first time, we recommend
that you change password for the “admin” account. You cannot delete the
admin account. For more information, see