Connecting a 110 ohm ltc signal to the card – Grass Valley SSP-3801 Installation v.1.3 User Manual
Page 27
23
SSP-3801
Installation and Configuration Guide
the two SSDs. If it does not, verify that the license was enabled correctly and the
SSD is well seated in the connectors.
Connecting a 110 ohm LTC signal to the card
A Linear Timecode (LTC) signal is an audio signal encoded with SMPTE timecode data with a
preferred range 1 to 2V used to support time synchronization between devices. The SSP-
3801 card provides one unbalanced input with a 75 ohm linear timecode BNC connector
(
LTC In
) which can be connected to an LTC generator to provide the card with a time code
source.
If your LTC generator generates a 110 ohm LTC signal, you must use a balun that converts a
110 ohm XLR connector to a 75 ohm BNC connector to connect your LTC generator to the
card.
- LDK 5302 (24 pages)
- SFP Optical Converters (18 pages)
- 2000GEN (22 pages)
- 2011RDA (28 pages)
- 2010RDA-16 (28 pages)
- 2000NET v3.2.2 (72 pages)
- 2000NET v3.1 (68 pages)
- 2020DAC D-To-A (30 pages)
- 2000NET v4.0.0 (92 pages)
- 2020ADC A-To-D (32 pages)
- 2030RDA (36 pages)
- 2031RDA-SM (38 pages)
- 2041EDA (20 pages)
- 2040RDA (24 pages)
- 2041RDA (24 pages)
- 2042EDA (26 pages)
- 2090MDC (30 pages)
- 2040RDA-FR (52 pages)
- LDK 4021 (22 pages)
- 3DX-3901 (38 pages)
- LDK 4420 (82 pages)
- LDK 5307 (40 pages)
- Maestro Master Control Installation v.1.5.1 (455 pages)
- Maestro Master Control Installation v.1.5.1 (428 pages)
- 7600REF Installation (16 pages)
- 7600REF (84 pages)
- 8900FSS (18 pages)
- 8900GEN-SM (50 pages)
- 8900NET v.4.3.0 (108 pages)
- Safety Summary (17 pages)
- 8900NET v.4.0.0 (94 pages)
- 8906 (34 pages)
- 8911 (16 pages)
- 8900NET v.3.2.2 (78 pages)
- 8914 (18 pages)
- 8912RDA-D (20 pages)
- 8916 (26 pages)
- 8910ADA-SR (58 pages)
- 8920ADC v.2.0 (28 pages)
- 8920ADC v.2.0.1A (40 pages)
- 8920DAC (28 pages)
- 8920DMX (30 pages)
- 8920ADT (36 pages)
- 8920MUX (50 pages)
- 8921ADT (58 pages)