Grass Valley SSP-3801 Installation v.1.3 - Manual (Page 46)

42
Configuring the SSP-3801 card
Configuring an external router for switching between live events
Type Configuration
None No configuration is required.
Virtual Router To configure the virtual router:
1 In the Router Size field, type the number of sources and
destinations (between 0 and 8,000) that you want available for the
test. For example, if you type 64, the virtual router will support 64
sources and 64 destinations.
2 In the Post Router Tally Delay field, type the value in milliseconds
(between 0 to 2000 ms) representing the delay between when the
message is received from the router controller confirming that the
switch has been made and when the actual switch is performed by
the router frame. Since the virtual router does not actually
perform
video switches, any value can be used.
3 The router settings must be saved and the router must be online
before the router destinations can be configured. Click
Save .
4 In the Destinations section, define the router destinations for the
inputs on the card. For each input:
• Click the Select button.
• Click Refresh to obtain a list of the available router sources.
• Click the desired router source and click Select. To filter the list,
type the name of the router source in the Search field. To order
the list, click the arrows in the column headers.