Grass Valley RCP-10x0 - Manual (Page 5)

GUIDE TO INSTALLATION AND OPERATION
RCP-10x0 | 1
1 RCP-10x0 Remote Control Panel
1.1 Introduction
The RCP-10x0 is a series of panels providing fast and easy operator remote control of the Densité HRS-
1801 routing switchers. It is available in multiple sizes and can control routers with sizes up to 40x4. All
models offer easy and ergonomic control via backlit push-buttons, which can be easily labeled using a backlit
legend strip. Labels for the strip can be printed using a template provided with the product.
Panel configuration is provided via a simple user-friendly web page, hosted in every control panel, and easily
accessible from any computer equipped with an Ethernet port. Advanced functionalities such as locks and
protects are fully supported by the RCP-10x0 panels and power is supplied using a compatible Ethernet
switch, or a Power over ethernet adapter supplied with the control panel.
1.2 Features
• Provides control for Densité HRS-1801 routers
• Single bus or XY operation
• User-friendly
web-based configuration
• Preset or direct mode
• Configurable locks and protections
• Power over Ethernet (PoE)
1.3 Overview
The RCP-10x0 is an Ethernet-based remote control panel for Miranda’s new HRS-1801 routing switcher
series. The RCP-10x0 control panel connects to the Densite frame via a 10/100 BaseT Ethernet network,
and controls a single router. The panel is powered over Ethernet (PoE).
Four versions of the RCP-10x0 are available, named according to the number of sources supported, and
with panel layouts as shown:
RCP-1010
RCP-1020
RCP-1030