Grass Valley RCP-10x0 - Manual (Page 27)

GUIDE TO INSTALLATION AND OPERATION
RCP-10x0 | 23
3. Set the DIP Switches on the panel to match the following image:
ON
2 3 4 1
4. Push the reset button of the panel using a paper clip.
5. Look at the “LINK/ACTIVITY” LED under the Ethernet connector
• it should be green and it might flash amber once in a while
6. Look at the LINK LED on the computer (usually located just beside the Ethernet connector). It should be
indicating a good link (green on most computers).