5 troubleshooting guide – Grass Valley RCP-10x0 User Manual
Page 26
GUIDE TO INSTALLATION AND OPERATION
22 | RCP-10x0
5 Troubleshooting
Guide
Here is what to do when you have a problem communicating between an HRS-1801 and an RCP-10x0.
Please follow ALL the steps in order.
5.1 Initial
setup
1. Connect the RCP-10x0 as depicted below:
PoE Power
Injector
Straight Ethernet cable
Computer
IN
OUT
CROSSOVER Ethernet cable
AC
IP parameters of this computer:
IP Address : 192.168.100.200
Subnet mask : 255.255.255.0
Gateway : 192.168.100.1
DIP Switch settings:
CONFIG mode
ROUTER mode
Make sure the Ethernet cable between the PoE Power Injector and the computer is a crossover cable.
2. Set the IP parameters of the computer as follow (Windows XP shown):
See also other documents in the category Grass Valley Equipment:
- LDK 5302 (24 pages)
- SFP Optical Converters (18 pages)
- 2000GEN (22 pages)
- 2011RDA (28 pages)
- 2010RDA-16 (28 pages)
- 2000NET v3.2.2 (72 pages)
- 2000NET v3.1 (68 pages)
- 2020DAC D-To-A (30 pages)
- 2000NET v4.0.0 (92 pages)
- 2020ADC A-To-D (32 pages)
- 2030RDA (36 pages)
- 2031RDA-SM (38 pages)
- 2041EDA (20 pages)
- 2040RDA (24 pages)
- 2041RDA (24 pages)
- 2042EDA (26 pages)
- 2090MDC (30 pages)
- 2040RDA-FR (52 pages)
- LDK 4021 (22 pages)
- 3DX-3901 (38 pages)
- LDK 4420 (82 pages)
- LDK 5307 (40 pages)
- Maestro Master Control Installation v.1.5.1 (455 pages)
- Maestro Master Control Installation v.1.5.1 (428 pages)
- 7600REF Installation (16 pages)
- 7600REF (84 pages)
- 8900FSS (18 pages)
- 8900GEN-SM (50 pages)
- 8900NET v.4.3.0 (108 pages)
- Safety Summary (17 pages)
- 8900NET v.4.0.0 (94 pages)
- 8906 (34 pages)
- 8911 (16 pages)
- 8900NET v.3.2.2 (78 pages)
- 8914 (18 pages)
- 8912RDA-D (20 pages)
- 8916 (26 pages)
- 8910ADA-SR (58 pages)
- 8920ADC v.2.0 (28 pages)
- 8920ADC v.2.0.1A (40 pages)
- 8920DAC (28 pages)
- 8920DMX (30 pages)
- 8920ADT (36 pages)
- 8920MUX (50 pages)
- 8921ADT (58 pages)