Grass Valley Maestro Master Control Reference Manual v.2.4.0 - Manual (Page 94)

94 MAESTRO — Automation Interface Protocol Technical Reference Manual
Section 4 — Definition of Supported Saturn Commands
VID_RATE (Transition rate [query])
Hex definition Mnemonic
4D VID_RATE
Command format:
Illegal
Query format:
READ VID_RATE
Reply format:
IFRE VID_RATE
Use applicable with UPDATE: Yes (NOTE: A "Cut" to Saturn is a rate change, NOT a mode change. Therefore,
the UPDATE response to setting the VID_MODE to XTAKE will be a VID_RATE response with the bytes
indicating the duration of the "Cut" as configured in the Saturn Master Control Description table of the Configuration Edi-
tor.)
Argument definitions:
<
trans rate> = 0, 1-3
0 = Transition Rate NOP IF_NULL
1 = Slow RATES
2 = Medium RATEM
3 = Fast RATEF
<seconds> = 0-9, 0-9 secs:tenths (two bytes)
Maestro applicability:
As stated