Maestro_dveffect – Grass Valley Maestro Master Control Reference Manual v.2.4.0 User Manual
Page 120
120
MAESTRO — Automation Interface Protocol Technical Reference Manual
Section 5 — Definition of Extended Maestro Commands
MAESTRO_DVEFFECT
Note
Automation interface does not validate the DVE audio mode parameter
against the available configured audio modes for the specified DVE Effect
Hex definition
Mnemonic
0x71
MAESTRO_DVEFFECT
Command format:
MAESTRO_DVEFFECT
Query format:
READ
MAESTRO_DVEFFECT
Reply format:
IFRE
MAESTRO_DVEFFECT
Use applicable with UPDATE:
Yes
Command Usage Notes:
1.
On all commands, a valid
following commands:
MAESTRO_DVE_EFFECT_EXIT_PGM
MAESTRO_DVE_EFFECT_EXIT_AUX
MAESTRO_DVE_EFFECT_EXIT_PST
On the above 3 commands, an <
audioMode> of 0 (Effect NOP) should be used.
2.
If a DVE is not active (i.e. DVE is not on program) then one must only send the following
tAction> argument values : 1 = Enter PGM MAESTRO_DVE_EFFECT_ENTER_PGM 3 = Enter AUX MAESTRO_DVE_EFFECT_ENTER_AUX 5 = Enter PST MAESTRO_DVE_EFFECT_ENTER_PST 3. If a DVE is active (i.e. DVE is on program) then one must only send the following argument values : 2 = Exit PGM MAESTRO_DVE_EFFECT_EXIT_PGM 4 = Exit AUX MAESTRO_DVE_EFFECT_EXIT_AUX 6 = Exit PST MAESTRO_DVE_EFFECT_EXIT_PST