Grass Valley Maestro Master Control Reference Manual v.2.4.0 - Manual (Page 74)

74 MAESTRO — Automation Interface Protocol Technical Reference Manual
Section 4 — Definition of Supported Saturn Commands
<mode> <ch rev>
Stereo Mode and Channel Reverse are not independent parameters in Maestro. In situations where there
is a conflict between the requested Stereo Mode and the requested and/or current Channel Reverse mode, the
requested Stereo Mode takes precedence over Channel Reverse. Basically, the only way to turn Channel Reverse
ON is to request NOP for the Stereo Mode parameter. The following table indicates the interaction between Ste-
reo Mode and Channel Reverse:
Decision Table for vs. parameters (SET_AUDIO)
Result Result
NOP NOP NOP NOP
NOP OFF NOP OFF
NOP ON NOP ON
MONO L+R NOP MONO L+R OFF
MONO L NOP MONO L OFF
MONO R NOP MONO R OFF
STEREO NOP STEREO OFF
MONO L+R OFF MONO L+R OFF
MONO L OFF MONO L OFF
MONO R OFF MONO R OFF
STEREO OFF STEREO OFF
MONO L+R ON MONO L+R OFF
MONO L ON MONO L OFF
MONO R ON MONO R OFF
STEREO ON STEREO OFF