Grass Valley Maestro Master Control Reference Manual v.2.4.0 - Manual (Page 91)

MAESTRO — Automation Interface Protocol Technical Reference Manual 91
VID_MODE (Transition mode select)
VID_MODE (Transition mode select)
Hex definition Mnemonic
4C VID_MODE
Command format:
VID_MODE
Query format:
READ VID_MODE
Reply format:
IFRE VID_MODE
Use applicable with UPDATE:
Yes (NOTE: A "Cut" to Saturn is a rate change, NOT a mode change. Therefore, the UPDATE response to setting the
VID_MODE to XTAKE will be a VID_RATE response with the bytes indicating the duration of the "Cut" as
configured in the Saturn Master Control Description table of the Configuration Editor.)
Argument definitions:
<
transition> = 0, 1-8
0 = Transition Type NOP IF_NULL
1 = Cut XTAKE
2 = Mix XMIX
3 - 5 = reserved
6 = Fade-Fade
XVFADE
7 = Cut-Fade XCFADE
8 = Fade-Cut XFADEC
Maestro applicability:
As stated