Grass Valley Kayenne XL Package Installation v.7.0.4 - Manual (Page 34)

34 Kayenne XL Package — Installation and Service Manual
Section 2 — Control Surfaces
Two Control Panel Assembly orientations are possible, flat and curved. The
curved panel provides improved operator ergonomics, but raises the
Control Panel height which could restrict the visibility of the lower portion
of a monitor wall. An assembled Control Panel can be operated from a
tabletop (the support structure includes rubber feet), or it can be installed
into a cutout.
The Local Aux Panel can be connected to the Control Panel support struc-
ture at a 45 degree angle, or it can be mounted separately in its own back-
splash cutout.
The following diagrams show some standard Control Panel assemblies.
Specific information for non-standard configurations is not included in this
document.
Control Panel Cooling
The Kayenne XL Control Panel is externally powered and does not have
internal cooling fans. The electronics in the panel is convection cooled. If
the panel is mounted in a counter-top, do not enclose the lower portion of
the cutout. Leave the bottom open to to allow passive air movement.
4-ME 35 Control Panel, Curved with Attached Aux
Figure 8. 4-ME 35 Control Panel Dimensions, Curved Installation
1533.7 mm
60.4 in.
8623266_12
813.5 mm
32.0 in.
1501.5 mm
59.1 in.
622.8 mm
24.5 in.
109.2 mm
4.3 in. 14.3 mm
0.6 in.
275.0 mm
10.8 in.
10.3 mm
0.4 in.
74.0 mm
2.9 in.