Grass Valley Kayenne XL Package Installation v.7.0.4 - Manual (Page 24)

24 Kayenne XL Package — Installation and Service Manual
Section 1 — Introduction
Flat or Curved Control Panel Orientation
The main Kayenne XL Control Panel supports different physical orienta-
tions. Besides a conventional flat surface, a special support design permits
a curved working surface, where the MEs progressively tilt for improved
ergonomics (
Figure 6 ).
Figure 6. Flat and Curved Control Surface Installations
Control Panel Stripes
The main Kayenne XL Control Panel is organized into from two to five
stripes. Each stripe consists of a tray that accepts drop-in modules. An ME
stripe has a module for Source Selection, Transition, and individual EMEM
control. Additional Master EMEM, Machine Control, Multi-Function, and
Local Aux modules are dropped in to complete the control surface func-
tionality.
Control Panel Modules
The following Kayenne XL Control Panel and Satellite modules are avail-
able:
• KAYN-PNL-TRM - Transition Module, used to control ME transitions
and keying.
• KAYN-PNL-LEM - Local EMEM Module, used to control EMEM effects
on that ME stripe.
• KAYN-PNL-MEM - Master EMEM Module, used for delegated EMEM
control of any or all system MEs.
• KAYN-PNL-MFM - Multi-Function Module, used for delegated control
of various functions
• KAYN-PNL-DCM - Device Control Module, used for internal and
external device control.
Straight Control Panel Assembly Curved Control Panel Assembly
8623266_36