Grass Valley Kaleido-X16 Installation v.7.70 - Manual (Page 34)

22
Kaleido-X16 Installation
Replacing a Defective Power Supply
To clean the air filter
1 Carefully remove the cover from the frame.
2 Place the cover flat on a work surface with the inside facing up.
3 Using a vacuum cleaner with a brush nozzle to prevent scratching, vacuum the dust
from the inner side of the cover.
4 Turn the cover over and vacuum the outer side of it.
5 Reinstall the cover onto the frame.
Replacing a Defective Power Supply
In the event of a power supply failure, the unit will switch to the redundant power supply
for its power source. If a PSU’s LED is not green, you must replace the unit.
For more information about removing and reinstalling a power supply, see Power Supplies ,
on page 7.
IMPORTANT
Risk of damage to CompactFlash card
Be careful not to damage the CompactFlash card as you remove the front
cover of the frame. Lift the cover directly away from the frame (i.e.: not up or
down).