Grass Valley K2 Summit Client Upgrade Instructions v.8.x Mar.02 2012 - Manual (Page 7)

11. After installing the replacement codec module, install the current version of K2 software and
restart.
This is a re-install of current software, not an upgrade. You must install the same version of
software that is currently on the K2 system now, regardless of whether you did or did not upgrade
software earlier in this procedure. You install software now to ensure that the board is flashed
with the proper version to be compatible with software currently on the K2 system. An over-install
is all that is required. You do not need to first un-install the software.
12. Log in to Windows and AppCenter, and open Configuration Manager. The new channels are
available for configuration.
Configure channels as follows:
• If you are installing K2-XDP-2SDIO-FK, your new channels are SD-only. Making settings as
desired on your new SD channels. Then your installation of K2-XDP-2SDIO-FK is complete.
• If you are installing K2-XDP-2HDIO-FK or K2-XDT-2HDIO-FK, do not configure your new
channels yet, as you must first license the new channels for HD. Continue with the next task to
apply the HD license to your new channels.
Installing the two channel HD license
Tools and materials needed:
• The license sheet you received with the upgrade kit.
This section provides instructions for the following field kits:
Description Upgrade Nomenclature
Upgrades two existing SD-only channels to support HD
operation. For a K2 Summit Production Client model currently
with two or four SD-only channels. K2-XDP-2HDL-FK
Upgrades two existing SD-only bi-directional channels to
support HD operation. For a K2 Summit Transmission Server
or K2 Summit Transmission Client model currently with two
or four SD-only channels. K2-XDT-2HDL-FK
Adds two HD/SD channels. For a K2 Summit Production Client
model originally with two SD channels or two HD/SD channels,
this is the second section in the steps to add two additional
channels that are HD/SD. K2-XDP-2HDIO-FK
Adds two HD/SD play-only channels. For a K2 Summit
Transmission Client or K2 Summit Transmission Server model
originally with two SD channels or two HD/SD channels, this
is the second section in the steps to add two additional play-only
channels that are HD/SD. K2-XDT-2HDIO-FK
Work through the tasks in this section sequentially.
02 February 2012 K2 Summit/Solo Field Kit Upgrade Instructions 7
Upgrade instructions