Grass Valley K2 Summit Client Upgrade Instructions v.8.x Mar.02 2012 - Manual (Page 20)

4. For each adapter shown, identify its location, as follows:
a) Under Network adapters, right-click one of the adapters and select Properties .
If prompted, enter administrator password.
The Properties dialog box opens.
b) On the General tab take note of Location displayed within the parentheses.
You must make a written record of the enumerator that the Windows operating system has
assigned to this location (PCI bus X, device 0, function X). Use the table below and fill in
the blanks:
To this location: On this system, Windows has assigned this
adapter name…
PCI bus ____, device 0, function ____ Intel ® PRO/1000 PT Dual Port Server
Adapter
PCI bus ____, device 0, function ____ Intel ® PRO/1000 PT Dual Port Server
Adapter #2
PCI bus ____, device 0, function ____ Intel ® PRO/1000 PT Dual Port Server
Adapter #3
PCI bus ____, device 0, function ____ Intel ® PRO/1000 PT Dual Port Server
Adapter #4
20 K2 Summit/Solo Field Kit Upgrade Instructions 02 February 2012
Upgrade instructions