Grass Valley K2 Summit Client Upgrade Instructions v.8.x Mar.02 2012 - Manual (Page 36)

Disable write filter
Prerequisite:
• K2 software must be installed on the K2 Summit/Solo system.
1. If you have not already done so, log on to the K2 Summit/Solo system with Windows administrator
privileges.
2. From the Windows desktop, click Start | All Programs | Grass Valley | Write Filter Utility .
FBWF Manager opens.
3. Under Filter Settings, set Filter to Disable .
Do not modify other settings.
4. Click OK .
5. When prompted, restart the K2 system.
Enable write filter
Prerequisite:
• K2 software must be installed on the K2 Summit/Solo system.
1. If you have not already done so, log on to the K2 Summit/Solo system with Windows administrator
privileges.
2. From the Windows desktop, click Start | All Programs | Grass Valley | Write Filter Utility .
FBWF Manager opens.
3. Under Filter Settings, set Filter to Enable .
4. Under Protected Volumes, set C: to Protected .
Do not modify other settings.
5. Click OK .
6. When prompted, restart the K2 system.
K2 Solo Media Server procedures
Refer to the following procedures as directed by the instructions for the Field Kit you are installing.
36 K2 Summit/Solo Field Kit Upgrade Instructions 02 February 2012
Upgrade instructions