Grass Valley K2 Summit Client Upgrade Instructions v.8.x Mar.02 2012 - Manual (Page 22)

5. Proceed as follows:
• If all the names on this system are configured correctly to locations, skip the rest of this
procedure.
• If names on this system are not configured correctly to locations, for each adapter name
incorrectly configured, complete the remaining steps of this procedure.
6. Select the name in the Name column.
7. Select File | Rename to enter rename mode.
8. Type the name required for the location.
Next, create the Control Team.
Create the Control Team
Before beginning this task, make sure of the following:
• Adapters are named
NOTE: Team control ports only. Do not team media ports.
1. In Device Manager, right-click the adapter name that on this system is assigned to location PCI
bus 4, device 0, function 1.
2. Select Properties
The Properties dialog box opens.
22 K2 Summit/Solo Field Kit Upgrade Instructions 02 February 2012
Upgrade instructions