Grass Valley K2 Summit Client Upgrade Instructions v.8.x Mar.02 2012 - Manual (Page 19)

rather than by the enumeration assigned by the Windows operating system and verify or modify the
adapter name as necessary.
1. Open Device Manager as follows:
a) On the Windows desktop, right-click the "My Computer" icon for your K2 system and select
Manage . The Computer Management window opens.
b) In the left pane select Device Manager .
Device Manager opens in the right pane.
2. In Device Manager, expand Network Adapters .
3. Verify the list of adapters. The adapters have similar names, with the first adapter having no
enumerator at the end of its name and the other adapters enumerated #2, #3, #4, etc.
The 1394 adapter is for the IEEE 1394a port on the rear panel. This port is for debugging purposes
only. It is not supported for customer use. Do not attempt to configure or otherwise use this port.
02 February 2012 K2 Summit/Solo Field Kit Upgrade Instructions 19
Upgrade instructions