Grass Valley K2 Summit Client Upgrade Instructions v.8.x Mar.02 2012 - Manual (Page 28)

7. After restart, to verify that the software is installed, on the Windows desktop right-click My
Computer and select Manage .
The Computer Management window opens.
8. In the left pane select Device Manager .
9. In the right pane open the System devices node and verify that GVG ISCSI Multi-Path Device
Specific Module is listed.
Next, do one of the following:
• If the K2 Summit system does not have a Fibre Channel card, skip ahead and install the SiteConfig
Discovery Agent.
• If the K2 Summit system has a Fibre Channel card, install the Fibre Channel card driver.
Related Links
Disable write filter on page 36
Installing the Fibre Channel card driver
Before installing the Fibre Channel card driver, make sure that K2 software is installed and the write
filter is disabled. Also, if the K2 Summit system is on a redundant K2 SAN or is connected to
direct-connect storage, make sure that MPIO software is installed.
If your K2 Summit system has the optional Fibre Channel card, the driver for the Fibre Channel
card is not installed on the recovery image provided by Grass Valley for that K2 Summit system.
Therefore, after restoring the image, you must install the Fibre Channel card driver.
A K2 Summit system can have one of the following types of Fibre Channel cards:
• LSI
28 K2 Summit/Solo Field Kit Upgrade Instructions 02 February 2012
Upgrade instructions