Name team and loopback – Grass Valley K2 Summit Client Upgrade Instructions v.8.x Mar.02 2012 User Manual
Page 25
9. Open the Modify Team dialog box as follows:
a) In
Device Manager | Network Adapters
, right-click
Control Team
and select
Properties
. The
Properties dialog box opens.
b) Select the
Settings
tab.
c) Click
Modify Team
. A dialog box opens.
10. On the
Adapters
tab, do the following:
a) Select the top entry, which is the adapter name that maps to Control Connection #1 (PCI bus
4, device 0, function 1) and click
Set Primary
.
b) Select the adapter name that maps to Control Connection #2 (PCI bus 3, device 0, function
1) and click
Set Secondary
.
11. Click
OK
and
OK
and to close dialog boxes.
12. Restart the K2 Summit/Solo system.
Next, name team and loopback.
Name team and loopback
Before beginning this task, make sure of the following:
•
Adapters are named
•
The control team is created
1. On the Windows desktop right-click
My Network Places
and select
Properties
. The Network
Connections window opens.
02 February 2012
K2 Summit/Solo Field Kit Upgrade Instructions
25
Upgrade instructions