Grass Valley LDK 5417 - Manual (Page 41)

LDK 5417 + LDK 4417 User’s Guide | Base Station connections 29
8. «GEN LOCK EXT. REF» receptacles The «looped through» reference signal input. The signal is
not loaded in the Base Station. Input level: 1 Vpp ~ 75
Ohm.
As a general rule, the signal must be of "composite video"
type to control the composite and digital signals at the
output from the Base Station (link J92 set to ON on the
GENLOCK/VIDEO board.
If the reference signal does not a "Burst", place link J92 on
the GENLOCK/VIDEO board to OFF position. The
composite signal subcarrier is then slaved with respect to
the composite sync signal.
Refer to the INSTALLATION Chapter 10 for equipment
phase alignment.
9. «COMPOSITE V.B.S.» receptacles. Encoded PAL or NTSC signal outputs. Levels: 1 Vpp ~ 75
Ohm.
10.«SERIAL DIGITAL OUTPUT» receptacles Serial digital signal outputs:
4:2:2, 270 Mbits.
GENLOCK
EXT. REF.
Receptacles
Type: P2189-A
P/N: T9003306
CVBS
1 2
Receptacles
Type: P2189-A
P/N: T9003306
1 2 3
SERIAL DIGITAL OUTPUT Receptacles+cables
Type:
98230x-021-009.0
P/N: T6000091