Grass Valley DD10 part 3 User Manual

Page 87

4. 7 Trajectory

Diamond digital DD10

307

With normal setting (50%) of the trajectory modifiers TENS, BIAS, CONTI, and
WEIGHT, the following course of movements results:

The following describes the influence of each control separately. For more creative
timeline design you can experiment with the controls and/or combine them.

As the trajectory controls are not effective for the first and the last keyframe, this
example only shows the modification of the values of the second keyframe (act#2).

The procedure is as follows:

–

Press Edit and select the hotkey of this timeline.

–

Verify that View is enabled.

–

Go to act#2 with the function key (act#2 is black).

–

Press Change (a large window appears with the bars of the trajectory modifiers).

–

Set all modifier to 50%.

–

Set modifier of the respective example to the indicated value and press OK

to enter the new value.

–

Press End Edit to end editing.

–

Press hotkey PLAY to play the result.