Grass Valley DD10 part 3 User Manual

Page 86

act

4.7 Trajectory

Diamond digital DD10

306

To describe how Smooth Trajectory mode works and how the user can modify it,
the following example describes a timeline with 3 keyframes in which the wipe posi-
tion e.g. of ME1 changes (the positions are shown below).

Wipe = small rhombus

–

Set ME1 so that the monitor shows the positioned wipe as displayed above
in act#1.

–

Select EXTRA menu.

–

Verify that ME1 is enabled in DEFINE MEMO.

–

Verify that TIME is not 0 (try 12 frames).

–

Set all trajectory modifiers to normal.

–

Set the trajectory type to SMOOTH.

–

Press Learn and select a storage location (hotkey).

–

Set ME1 so that it corresponds to the above act#1.

–

Press STORE to enter the first keyframe.

–

Set positioner so that it corresponds to the above act#2.

–

Press STORE to enter the second keyframe.

–

Set positioner so that it corresponds to the above act#3.

–

Press STORE to enter the third keyframe.

–

Press Learn to complete the storing of the timeline.

–

Play the timeline.

In order to display the resulting trajectory, the three keyframes are combined in one
picture. Use the STORE-function in the menu.