Grass Valley CONTROL Center CameraMan Rev.B - Manual (Page 40)

Customize Your CONTROL Center Page 37
Setting Camera Video Parameters
AE Win Setting Display Path: MENU > CAMERA ADJUST > MORE > MORE > AE WIN
The size of the Automatic Exposure Window dictates how much of the video frame is used in
determining the AGC, CCD-Iris, and auto iris settings. Default: Large.
Fld/Frm Setting Display Path: MENU > CAMERA ADJUST > MORE > MORE FLD/FRM
Use the Function Button to toggle between Field and Frame.
• FIELD: Used to eliminate blur when shooting fast moving objects. The CCD
accumulates and outputs the charges, field-by-field, to give pictures showing a
minimum of blur even when the subject is fast moving.
• FRAME: For producing pictures with the highest possible vertical resolution. The CCD
accumulates and outputs the charges frame by frame.
• Default: FIELD.
If you are using a booster (see page 24), the FIELD/FRAME setting remains fixed
on FRAME.
Shutter Menus Display Path: MENU > CAMERA ADJUST > MORE > MORE >SHUTTER
The electronic shutter enables you to obtain blur-free pictures of fast-moving subjects and to
produce good still images of subjects shot in poor lighting conditions. The Function Button
steps through the option menus. Default mode: OFF.
OFF: Turns off the electronic shutter.
CCD-IRIS: The CCD-Iris mode increases the shutter speed automatically when an excessive
amount of light passes through the lens. This has the same effect as reducing the
lens iris by six stops.
Camera Adjust
Menu 2
Shutter Menu in
OFF Mode (above)
and in CCD-IRIS
Mode (below)
Large Window Medium Window Spot Window