Grass Valley CONTROL Center CameraMan Rev.B - Manual (Page 18)

Use Your CONTROL Center Page 15
The knobs, buttons, and slide controls are used in conjunction with the LCD display screen of your CameraMan CONTROL Center.
The screen provides menus for camera parameters, camera selection, and audio/video switching control. The LCD display shows
status of devices and provides selections for action.
CAMERA # and MENU TITLE FIELD
FUNCTION
COMMAND
FIELD 1
FUNCTION
COMMAND
FIELD 2
FUNCTION
COMMAND
FIELD 3
FUNCTION
COMMAND
FIELD 4
Control Unit LCD Display Features
The LCD screen, the four Function Command Buttons below it, and the four menu choice
buttons: Home, Menu, Setup, and Back, all work with each other to provide information and
to provide action options to the user.
▼ Camera # and Menu Title Field
Camera Control Mode: Numbers and words in this location identify the Camera Selected
and the title (Home, Setup, etc.) for each menu display.
Video/Audio Switching Control Mode: Numbers and words in this location identify the
Camera Selected and the title for each menu display.
▼ Function Command Fields
Camera Control Mode: Items in these locations correspond to the Function Command
Buttons directly below them. The command fields change depending on the menu displayed.
Video/Audio Switching Control Mode: Items in these locations correspond to the Function
Command Buttons directly below them. The information in the fields indicate the status of
the video or audio inputs and outputs. The screen toggles between video and audio when
you press the Enter key.
The initial menu on Power Up is always the Home menu. From the Home menu, you can
access additional menus by pressing the Menu, Setup, or indicated Function Command Button.
The screen information changes from menu to menu reflecting the menu’s purpose. The fields
over the Function Command Buttons also change from menu to menu offering additional
options per menu.
Knobs, Buttons, Slide Controls And Displays
Right Side: Slide Controls and Joystick
▼ Speed Control Slide Bars – Manual adjustment of the maximum speed of the
camera’s pan/tilt motion, and lens (3-CCD and 2112) zoom motion. When the slide
bar is at the down limit, the control is OFF.
▼ Joystick (X–Y Control) – Manual control of the camera’s pan/tilt motion. This control
is speed proportional.
▼ Joystick (Rotational Control) – Manual zoom control, in (clockwise) for tighter views,
and out (counter-clockwise) for wider views. This control is speed proportional.
autoTRACK version only:
▼ autoTRACK button – Located on the top of the joystick, activates/deactivates the
autoTRACK capability of an autoTRACK camera.
Standard CONTROL
Center
autoTRACK CONTROL Center