H3C Technologies H3C SecCenter UTM Manager - Manual (Page 88)

80
Adding an IP group
From the navigation tree of the bandwidth management component, select IP Groups under Analysis by
IP Group to enter the IP group management page. On the page, click Add to enter the page for adding
an IP Group, as shown in
Figure 73 . Table 70 describe the configuration items for adding an IP group.
Figure 73 Add an IP group
Table 70 Configuration items for adding an IP group
Item Description
Group Name
Required
Type the name for the group.
The group name can comprise up to 20 characters and must not contain
these characters: ” < > % & : ; /
Description
Required
Type the description for the group.
The group description can comprise up to 40 characters.
Return to IP group management functions .
Adding IP addresses to an IP group
From the navigation tree of the bandwidth management component, select IP Groups under Analysis by
IP Group to enter the IP group management page. On this page, you can do the following:
• Click the icon of an IP group to enter the IP address management page of the IP group, as
shown in Figure 74 . Table 71 describes the fields of the IP address management list.
• Click Add to add IP addresses to the IP group, as shown in Figure 75 . Table 72 describes the
configuration item.
• Select one or more address ranges and click Delete to delete them from the IP group.
Figure 74 IP address management page