H3C Technologies H3C SecCenter UTM Manager - Manual (Page 50)

42
2. Configure the ports. Table 38 describes the configuration items.
3. Click Apply.
Figure 39 Management port configuration page
Table 38 Management port configuration items
Item Description
Stream Logs Port
Required
Type the port for receiving stream logs.
Stream logs are used for bandwidth management. You need to ensure that
the corresponding UTM devices are configured to send such logs to this
port. For more information, see “ Configuration example 1 .”
The port number must be in the range from 1 to 65534. The default is
30010.
NAT Logs Port
Required
Type the port for receiving NAT logs.
NAT logs are used for NAT log auditing. They are in an H3C proprietary
binary format. You need to ensure that the corresponding firewall devices
are configured to send such logs to this port. For more information, see
“ Configuration example 1 .”
The port number must be in the range from 1 to 65534. The default is
30017.
Syslog Logs Port
Required
Type the port for receiving syslogs. Syslogs are used for security event
management functions such as behavior auditing, IPS, and firewall.
The port number must be in the range from 1 to 65534. The default is
30514.
Sflow Logs Port
Required
Type the port for receiving Sflow logs.
The port must be in the range from 1 to 65534. The default is 30019.