H3C Technologies H3C SecCenter UTM Manager - Manual (Page 48)

40
Item Description
New Password
Required
Type the new password.
This password must be an alphanumeric string of 6 to 20 characters.
Confirm Password
Required
Type the new password again.
This password must be exactly the same as that for New Password.
System configuration
The system configuration module allows you to perform the following tasks:
• Configuring service parameters
• Configuring system parameters
• Configuring management ports
• Configuring the mail server
• Configuring SMS alarming
• Managing filters
• Managing LDAP servers
• Configuring SMS alarming
• Configuring segments
• Monitoring the disk space
• Managing subsystems
Configuring service parameters
Follow these steps:
1. From the navigation tree of the system management component, select Service Parameters under
System Config. The service parameter configuration page appears, as shown in Figure 37 .
2. Select options as needed.