H3C Technologies H3C SecCenter UTM Manager - Manual (Page 218)

210
Item Description
Time Range
Required
Specify the time periods during which a security policy that references the time
range take effect.
A time period can be periodic or absolute:
• Periodic—Select the start time and end time for the periodic time period,
and then select the days of the week during which the time period applies.
By default, the periodic time period is from 0:0 to 24:0 every day.
• Absolute—Select the start time and end time for the absolute time period.
By default, the absolute time period is a 24-hour period starting from the full
hour of the current time. An absolute time range takes effect only once.
Return to Time range management functions .
Managing services
Configuration guide
From the navigation tree of the firewall management component, select Services under Security Policy
Management. The predefined service management page appears, as shown in Figure 206 . Table 185
describes the functions of the tabs.
Figure 206 Service management page
Table 185 Service management functions
Function Description
Predefined services Allows you to view the detailed information of all predefined services.
User-defined services Allows you to manage user-defined services.
Service groups Allows you to manage service groups.