H3C Technologies H3C SecCenter UTM Manager - Manual (Page 224)

216
Figure 212 Add a host address
Table 193 Host address configuration items
Item Description
Name
Required
Type a name for the host address.
The name can contain only digits (0-9), letters (a-z), and underscores (_), and
cannot start or end with an underscore.
IMPORTANT:
The name must be unique in the system. It cannot be the same as the name of an
existing host address, address range, subnet address, or IP address group.
Description
Optional
Type some descriptive information for the host address.
IP Address
Required
Specify IP addresses for the host address.
• Input an IP address and click Add next to the text box to add the IP address
to the IP addresses list. You can also select an IP address on the list and click
Delete to remove the IP address from the list.
• The IP addresses must be in dotted decimal notation.
To delete host addresses, select them and click Delete on the host address management page.
Return to
IP address management functions .
Address ranges
From the navigation tree of the firewall management component, select IP Addresses under Security
Policy Management. Click the Address Ranges tab to enter the address range management page, as
shown in Figure 213 . Table 194 describes the fields of the address range list.