H3C Technologies H3C SecCenter UTM Manager - Manual (Page 52)

44
Table 39 Mail server configuration items
Item Description
Mail Server IP
Required
Type the IP or domain name of the mail server.
The domain name can comprise up to 40 characters.
Require authentication
Optional
Specify whether to authenticate users accessing the mail server.
Username
Optional
Type the username for identity authentication on the mail server.
The password can comprise up to 40 characters.
Password
Optional
Type the password for identity authentication on the mail server.
The password must comprise 6 to 20 alphanumeric characters, and its
strength must meet the password strength requirements of the device.
Sender’s Mail Address
Required
Type the mail address of the sender.
Send to
Optional
Type an email address and click Test. An email will be sent to the email box
for testing.
Configuring SMS alarming
You can specify a phone number to which alarms are to be sent by Short Message Service (SMS)
messages.
Follow these steps:
1. From the navigation tree of the system management component, select SMS Alarm Configuration
under System Config. The SMS alarm configuration page appears, as shown in
Figure 41 .
2. Configure the settings. Table 40 describes the SMS alarming configuration items.
3. Click Apply.
Figure 41 Configure SMS alarming