H3C Technologies H3C SecCenter UTM Manager - Manual (Page 176)

168
Table 148 Policy application configuration items
Item Description
Please select segment
Required
Select segments to which the policy applies. At least one segment must be
selected.
Policy Type
Required
Select a policy type.
Policy
Required
Select a policy.
Which policies are available depends on the policy type.
Direction
Required
Select a direction to which the policy applies. Options include inbound,
outbound, and both.
Internal Zone IP
Required
Select an IP address group from the dropdown list. The policy applies to all IP
addresses that are in the IP group on the internal zone IP list.
The default option All IPv4 specifies the whole internal zone.
Click
to add an IP address group.
External Zone IP
Required
Select an IP address group from the dropdown list. The policy applies to all IP
addresses that are in the IP group on the external zone IP list.
The default option All IPv4 specifies the whole internal zone.
Click
to configure a new IP address group.
Policy Application
Required
Enable or disable the policy application.
NOTE:
If you select Disable, the system saves the policy application, but does not
deploy the application to IPS devices.
Return to Policy application management functions .
Displaying attack signatures
The attack signatures page displays the attack signatures in the attack signature file.
Configuration guide
From the navigation tree of the IPS management component, select Attack Signatures under Policy
Management to enter the attack signature list page, as shown in Figure 160 . Table 149 describes the
query options on the attack signature list page, and Table 150 describes fields of the attack signature list.