H3C Technologies H3C SecCenter UTM Manager - Manual (Page 53)

45
Table 40 SMS alarming configuration items
Item Description
Enable SMS Alarm
Required
Specify whether to enable SMS alarming.
COM Port
Required
Select a COM port for sending SMS messages. The port defaults to COM4.
Baud Rate
Required
Select a baud rate for sending SMS messages.
Send to
Optional
Type a number and click Test. A message will be sent to the phone for testing.
Managing filters
A filter filters information captured by UTM devices to present you only information of interest through
reports. The IPS and firewall modules may use filters to filter various security events.
By configuring filters, you can specify filtering conditions flexibly.
Configuration guide
From the navigation tree of the system management component, select Filter Management under System
Config. The filter management page appears, as shown in Figure 42 . Table 41 describes the filter
management functions.
Figure 42 Filter management page
Table 41 Filter management functions
Function Description
Filter list Allows you to view details about filters and modify filter settings.
Adding a filter Allows you to add filters.
Deleting filters
Allows you to delete filters that are no longer in use.
Follow these steps:
1. Select the check boxes before the filters to be deleted.
2. Click Delete.