H3C Technologies H3C SecCenter UTM Manager - Manual (Page 181)

173
Field Description
Event Notification
Alarm method when an event is recorded and an alarm is triggered, which can be
email alarm, sound alarm, or both.
Unacknowledged Events
Number of events that are not acknowledged.
If the field is null, that means all events of the particular kind are acknowledged.
Last Trigger Time when the last alarm was triggered.
Status
Status of the custom event, which can be enabled or disabled.
Only enabled custom events can filter log data.
Operation Allows you to modify custom event settings.
Authorized Operators Displays operators who are authorized to custom the event.
Adding a custom event
1. From the navigation tree of the IPS management component, select Custom Events under Policy
Management to enter the custom event management page.
2. Click Add to enter the page for adding a custom event, shown in Figure 165 .
3. Type the custom event name and description, select a level, configure rules and the alarm mode,
and specify the custom event status.
Table 154 describes configuration items for adding a custom
event.
4. Click OK.