H3C Technologies H3C SecCenter UTM Manager - Manual (Page 212)

204
Auditing NAT logs
From the navigation tree of the firewall management component, select NAT Logs under Event Auditing
to enter the NAT log auditing page. The page lists NAT logs of H3C firewalls. Each log records the
source IP:port and destination IP:port before and after network address translation, as well as the NAT
session start time and end time.
Figure 197 NAT log auditing
Auditing interzone access logs
From the navigation tree of the firewall management component, select Inter-Zone Access Logs under
Event Auditing to enter the inter-zone access log auditing page, as shown in
Figure 198 .
A zone is a set consisting of one or more network segments. Inter-zone access logs are logs recorded by
the firewall device when network segments of security zones are attacked. Inter-zone access log auditing
is for analysis of such logs. Each log records the time when the attack occurred, the attack's source zone,
destination zone, source IP:port, destination IP:port, attack protection rule ID, protocol, and action taken
by the system, helping you know about the inter-zone access status of the network.
Figure 198 Inter-zone access log auditing