H3C Technologies H3C SecPath F5000-A5 Firewall - Manual (Page 92)

82
Interface modules
The F5000-A5 firewall must have at least one interface module in addition to one MPU. The slots for
interface modules are slot 1 through slot 4.
NSQ1GT8C40
The NSQ1GT8C40 interface module provides eight 10/100/1000BASE-T copper Ethernet ports and
four combo interfaces. These ports can be set to operate as Layer 2 interfaces or Layer 3 interfaces.
Each combo interface comprises one 10/100/1000BASE-T copper port and one 1000BASE-X fiber port.
When one port in a pair is activated, the other port automatically shuts down.
Figure 60 NSQ1GT8C40 panel view
(1) 8 copper Ethernet ports (2) 4 copper/fiber combo interfaces
(3) Fiber port in a combo interface (4) Copper port in a combo interface
(5) Ejector lever (6) Captive screw
NSQ1XP20
The NSQ1XP20 provides two 10-GE XFP ports. This module can work in LAN PHY mode but not in WAN
PHY mode. These ports can be set to operate as Layer 2 interfaces or Layer 3 interfaces.
Figure 61 NSQ1XP20 panel view
(1) Captive screw (2) Ejector lever
(3) 2 x 10-GE XFP ports