beautypg.com

Installing a filler panel – H3C Technologies H3C SecPath F5000-A5 Firewall User Manual

Page 63

background image

53

Figure 46 Removing a filler panel from an interface module slot

NOTE:
•

Keep the removed filler panels and screws for future use.

•

H3C recommends that you install filler panels in all empty slots to prevent dust from entering the firewall
chassis and make sure of good ventilation in the firewall.

Installing a filler panel

This section takes the filler panel for an interface module slot as an example.

To install a filler panel:

1.

Face the front panel of the firewall.

2.

Cover the filler panel on the slot with the EMI gaskets side facing upward.

3.

Fasten the captive screws with a Phillips screwdriver.

See also other documents in the category H3C Technologies Safety: