H3C Technologies H3C SecPath F5000-A5 Firewall - Manual (Page 73)

63
Displaying running status data
For diagnosis or troubleshooting, you can use the display diagnostic-information command in any view
to bulk collect running data for multiple modules, rather than using separate display commands (such as
display clock, display version, display device, and display current-configuration) to collect running
status data module by module.
• Save running status data for multiple feature modules.
display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.diag)[cfa0:/default.diag]:aa.diag
Diagnostic information is outputting to cfa0:/aa.diag.
Please wait...
Save successfully.
To view the content of file aa.diag, execute the more aa.diag command in user view, in
combination of the Page Up and Page Down keys.
• Display running status data for multiple feature modules.
display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================
===============display clock===============
=================================================
08:54:16 UTC Fri 11/12/2010
===================================================
===============display version===============
===================================================
…
Displaying detailed information about cards
Use the display device verbose command to display detailed information about cards.
display device verbose
Status : OK
Type : RPU
MPUA PCB : B
SWBA PCB : A
MPUA Basic CPLD: 3.0
MPUA Extend CPLD: 1.0
SWBA CPLD: 1.0
MPUA LX30T FPGA: 7.01
Driver : 1.0
SubCard Num : 5
CFCard Num : 2
Usb Num : 2