beautypg.com

Installing a power module – H3C Technologies H3C SecPath F5000-A5 Firewall User Manual

Page 33

background image

23

NOTE:
•

The fans can automatically adjust the speed.

•

For the LED description of the fan tray, see "

Fan tray LEDs

."

Installing a power module

The procedures for installing an AC power module and DC power module are similar. The following uses
an AC power module as an example.

1.

Locate the slot to install the power module. Use even pressure to gently push the power module
slowly along the slide rails into the slot.

Figure 19 Installing the power module

2.

Fasten the captive screws on the power module with a Phillips screwdriver.

3.

After connecting the power cord, power on the power module.
If the power module LED is green, the power module is operating correctly. If the LED is red, the
power module has failed.

See also other documents in the category H3C Technologies Safety: