H3C Technologies H3C SecPath F5000-A5 Firewall - Manual (Page 62)

52
NOTE:
The MPU and interface module slots use the same type of filler panels.
Figure 45 Filler panel for a power module slot
(1) Front view (2) Side view
(3) Rear oblique view (4) EMI gasket
Removing a filler panel
This section takes the filler panel for an interface module slot as an example.
To remove a filler panel:
1. Face the front panel of the firewall.
2. Loosen the two captive screws with a Phillips screwdriver until all pressure is released.
3. Remove the filler panel.
(1)
(2)
(3)
(4)
1
2
3
4