H3C Technologies H3C SecPath F5000-A5 Firewall - Manual (Page 56)

46
Figure 40 Basic configuration wizard—3/6 (service management)
2. Configure services as described in Table 7 .
Table 7 Configuration items
Item Description
FTP
Specify whether to enable the FTP service on the firewall.
By default, the FTP service is disabled.
Telnet
Specify whether to enable the Telnet service on the firewall.
By default, the Telnet service is disabled.
HTTP
Specify whether to enable the HTTP service on the firewall.
To enable the HTTP service on the firewall, select the Enable option and select the HTTP service
port number.
By default, the HTTP service is enabled.
IMPORTANT:
• If you are using the HTTP service, disabling the HTTP service or changing the service port
number breaks your connection to the firewall.
• Make sure no other services are using the specified service port number.