H3C Technologies H3C SecPath F5000-A5 Firewall - Manual (Page 117)

107
Figure 80 Binding cables where they must be bent
• Route, bind, and attach excess cables for easy, safe maintenance activities and correct operations.
• Do not tie power cables to slide rails.
• When you connect a cable to an articulated part, for example, when you connect a grounding
cable to a cabinet door, leave enough slack in cables and make sure they are not stressed from any
movement of the part.
• Cables must be protected at points where they might rub or come in contact with sharp edges or
heated areas. Use high temperature cables near heat sources.
• Securely fasten cables and take adequate measures to prevent loose connections.
Figure 81 Securely fastening cables
(1) Flat washer (2) Spring washer (3) Nut
• Fasten heavy or rigid power cables at the connectors to relief stress.
• Do not use tapping screws to fasten the connecting terminals.
• Bind together cables that are the same type and routed in the same direction.
Table 36 lists the cable bundling specifications.
(1) (1)(2) (3) (1) (1)(2) (3)