H3C Technologies H3C LSWM1WCM10 Access Controller Module - Manual (Page 46)

39
Enter file No:
2. Enter the file number at the prompt above. In this example, type 1 for main.bin, and press Enter.
The system prompts you to specify a new file type:
Modify the file attribute:
==========================================================================
|<1> +Main |
|<2> -Main |
|<3> +Backup |
|<4> -Backup |
|<0> Exit |
==========================================================================
Enter your choice(0-4)
3. Select 1 for +Main (set to M), 2 for –Main (remove the current M attribute), 3 for +Backup (set to
B), or 4 for –Backup (remove the current type B setting). For more information about the file types,
see “ Appendix Introduction to software maintenance .”
Deleting a file at the BootWare menu
1. Select 4 in the file control submenu. The following information appears:
Deleting the file in cfa0:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 22554232 Mar/20/2009 09:56:54 M+B cfa0:/main.bin |
|2 987 Mar/20/2009 09:20:50 N/A cfa0:/startup.cfg |
|3 177 Mar/19/2009 14:15:04 N/A cfa0:/system.xml |
|0 Exit |
==========================================================================
Enter file No:
2. Type a file number and press Enter. The system asks you to confirm your operation.
The file you selected is cfa0:/startup.cfg,Delete it? [Y/N]
3. Enter Y for confirmation. The following message appears, indicating the file is successfully deleted.
Deleting..........Done!