H3C Technologies H3C LSWM1WCM10 Access Controller Module - Manual (Page 32)

25
|<5> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-5):
Ethernet submenu
Select 3 in the BootWare main menu to enter the Ethernet port submenu. The following information
appears:
==================================================
|Note:the operating device is cfa0 |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
| |
==========================================================================
Enter your choice(0-5):
File control submenu
Select 4 in the BootWare main menu to enter the file control submenu. You can view the application file
types, rename files, and delete files through this submenu.
============================================================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Set Configuration File type |
|<4> Delete File |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-4):
NOTE:
Access controller modules do not support the setting of primary and secondary configuration files,
namely, the <3> Set Configuration File type option in File Control submenu.
BootWare operation submenu
Select 7 in the BootWare main menu to enter the BootWare operation submenu:
=================================================
|Note:the operating device is cfa0 |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |