H3C Technologies H3C LSWM1WCM10 Access Controller Module - Manual (Page 26)

19
Maintaining application and configuration files
at the CLI
Displaying all files at the CLI
View the files in the current file system with the dir command.
dir
Directory of cfa0:/
0 -rw- 22554232 Mar 20 2009 09:56:54 main.bin
1 -rw- 987 Mar 20 2009 09:20:50 startup.cfg
2 -rw- 177 Mar 19 2009 14:15:04 system.xml
252164 KB total (230130 KB free)
File system type of cfa0: FAT32
Setting the application file type at the CLI
• To set type of main.bin to main, use the following command:
boot-loader file main.bin main
This command will be set the boot file.Continue?[Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
• To set type of main.bin to backup, use the following command:
boot-loader file main.bin backup
This command will be set the boot file.Continue?[Y/N]:y
The specified file will be used as the backup boot file at the next reboot on slot 1!
Deleting a File at the CLI
To delete startup.cfg, use the following command:
delete /unreserved startup.cfg
The contents cannot be restored!!! Delete cfa0:/startup.cfg?[Y/N]:y
%Delete file cfa0:/startup.cfg...Done