H3C Technologies H3C LSWM1WCM10 Access Controller Module User Manual
Page 42
35
|-----------------------------
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
==========================================================================
Enter your choice(0-5):
4.
Change the baud rate as described in “
Modifying serial port parameters
.” After the modification,
the system displays the following information:
Baudrate has been changed to 115200 bps.
Please change the terminal's baudrate to 115200 bps, press ENTER when ready.
The current baudrate is 115200 bps
=================================
|Note:'*'indicates the current baudrate |
| Change The HyperTerminal's Baudrate Accordingly |
|---------------------------
|<1> 9600(Default) |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200* |
|<0> Exit |
==========================================================================
Enter your choice(0-5):
5.
Select 0 to return to the BootWare operation serial port submenu.
======================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Serial Interface Parameter |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-4):
6.
Select 1 in the BootWare operation serial port submenu. The following prompt appears:
Please Start To Transfer File, Press
Waiting ...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
7.
Select Transfer > Send file… in the HyperTerminal window. The following dialog box appears: