Displaying all files at the bootware menu – H3C Technologies H3C LSWM1WCM10 Access Controller Module User Manual
Page 45
38
Appendix Maintaining application and
configuration files at the BootWare menu
You can modify the type of an application file, display all files, and delete a file on the file control
submenu.
Select 4 on the main menu to enter the file control submenu. The following information appears:
===============================
|Note:the operating device is cfa0 |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Set Configuration File type |
|<4> Delete File |
|<0> Exit To Main Menu |
==========================================================================
Enter your choice(0-4):
NOTE:
Access controller modules do not support the setting of primary and secondary configuration files,
namely, the <3> Set Configuration File type option in File Control submenu.
Displaying all files at the BootWare menu
Select 1 in the file control submenu. The following information appears:
Display all file(s) in cfa0:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 22554232 Mar/20/2009 09:56:54 M+B cfa0:/main.bin |
|2 987 Mar/20/2009 09:20:50 N/A cfa0:/startup.cfg |
|3 177 Mar/19/2009 14:15:04 N/A cfa0:/system.xml |
==========================================================================
Setting the application file type at the BootWare
menu
1.
Select 2 in the file control submenu. The following information appears:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
==========================================================================
|NO. Size(B) Time Type Name |
|1 22554232 Mar/20/2009 09:56:54 M+B cfa0:/main.bin |
|0 Exit |
==========================================================================